|
Balanset-1A: Cutting-edge Portable Balancer & Vibration Analyzer
Modern Dynamic Balancing Solution
Balanset-1A serves as an advanced solution for rotor balancing of rotors in their own bearings, manufactured by Estonian company Vibromera OU. The device delivers professional equipment balancing at €1,751, which is significantly cheaper than traditional vibration analyzers while maintaining high measurement accuracy. The system enables in-place balancing directly at the equipment's working position without necessitating disassembly, which is essential for preventing production downtime.
About the Manufacturer
Vibromera OU is an Estonian company concentrating in the creation and production of devices for technical diagnostics of industrial equipment. The company is registered in Estonia (registration number 14317077) and has representatives in Portugal.
Contact Information:
Official website: https://vibromera.eu/shop/2/
Technical Specifications
Detection Parameters
Balanset-1A delivers accurate measurements using a dual-channel vibration analysis system. The device measures RMS vibration velocity in the range of 0-80 mm/s with an accuracy of ±(0.1 + 0.1?Vi) mm/s. The operating frequency range is 5-550 Hz with potential extension to 1000 Hz. The system supports RPM measurement from 250 to 90,000 RPM with phase angle determination accuracy of ±1 degree.
Operating Principle
The device uses phase-sensitive vibration measurement technology with MEMS accelerometers ADXL335 and laser tachometry. Two uniaxial accelerometers measure mechanical oscillations proportional to acceleration, while a laser tachometer generates impulse signals for calculating rotation frequency and phase angle. Digital signal processing includes FFT analysis for frequency analysis and specialized algorithms for automatic computation of corrective masses.
Full Kit Contents
The standard Balanset-1A delivery includes:
Measurement unit with USB interface - central module with embedded preamplifiers, integrators, and ADC
2 vibration sensors (accelerometers) with 4m cables (optionally 10m)
Optical sensor (laser tachometer) with 50-500mm measuring distance
Magnetic stand for sensor mounting
Electronic scales for exact measurement of corrective masses
Software for Windows 7-11 (32/64-bit)
Plastic transport case
Complete set of cables and documentation
Operating Capabilities
Vibrometer Mode
Balanset-1A works as a full-featured vibration analyzer with features for measuring overall vibration level, FFT spectrum analysis up to 1000 Hz, calculating amplitude and phase of the fundamental frequency (1x), and continuous data recording. The system offers display of time signals and spectral analysis for equipment condition diagnostics.
Balancing Mode
The device supports single-plane (static) and dual-plane (dynamic) balancing with automatic calculation of corrective masses and their installation angles. The unique influence coefficient saving function enables considerable acceleration of subsequent balancing of same-type equipment. A dedicated grinding wheel balancing mode uses the three-correction-weight method.
Software
The easy-to-use program interface offers step-by-step guidance through the balancing process, making the device usable to personnel without specific training. Key functions include:
Automatic tolerance calculation per ISO 1940
Polar diagrams for imbalance visualization
Result archiving with report generation capability
Metric and imperial system support
Multilingual interface (English, German, French, Polish, Russian)
Usage Domains and Equipment Types
Industrial Equipment
Balanset-1A is successfully applied for balancing fans (centrifugal, axial), pumps (hydraulic, centrifugal), turbines (steam, gas), centrifuges, compressors, and electric motors. In production facilities, the device is used for balancing grinding wheels, machine spindles, and drive shafts.
Agricultural Machinery
The device provides particular value for agriculture, where continuous operation during season is critically important. Balanset-1A is applied for balancing combine threshing drums, shredders, mulchers, mowers, and augers. The ability to balance on-site without equipment disassembly allows avoiding costly downtime during critical harvest periods.
Specialized Equipment
The device is successfully used for balancing crushers of various types, turbochargers, drone propellers, and other high-speed equipment. The rotation frequency range from 250 to 90,000 RPM covers virtually all types of industrial equipment.
Superiority Over Competitors
Economic Efficiency
At a price of €1,751, Balanset-1A offers the functionality of devices costing €10,000-25,000. The investment pays for itself after preventing just 2-3 bearing failures. Cost reduction on third-party balancing specialist services reaches thousands of euros annually.
Ease of Use
Unlike complicated vibration analyzers requiring months of training, mastering Balanset-1A takes 3-4 hours. The step-by-step guide in the software allows professional balancing by personnel without specialized vibration diagnostics training.
Portability and Autonomy
The complete kit weighs only 4 kg, with power supplied through the laptop's USB port. This enables balancing in field conditions, at distant sites, and in hard-to-reach locations without additional power supply.
Universal Application
One device is appropriate for balancing the most extensive spectrum of equipment - from small electric motors to large industrial fans and turbines. Support for one and dual-plane balancing covers all standard tasks.
Real Application Results
Drone Propeller Balancing
A user achieved vibration reduction from 0.74 mm/s to 0.014 mm/s - a 50-fold improvement. This demonstrates the exceptional accuracy of the device even on small rotors.
Shopping Center Ventilation Systems
Engineers successfully balanced radial fans, achieving reduced energy consumption, removed excessive noise, and prolonged equipment lifespan. Energy savings recovered the device cost within several months.
Agricultural Equipment
Farmers note that Balanset-1A has become an essential tool preventing costly breakdowns during peak season. Lower vibration of threshing drums led to reduced fuel consumption and bearing wear.
Pricing and Delivery Terms
Current Prices
Complete Balanset-1A Kit: €1,751
OEM Kit (without case, stand, and scales): €1,561
Special Offer: €50 discount for newsletter subscribers
Volume Discounts: up to 15% for orders of 4+ units
Acquisition Options
Official Website: vibromera.eu (recommended)
eBay: verified sellers with 100% rating
Industrial Distributors: through B2B channels
Payment and Shipping Terms
Payment Methods: PayPal, bank cards, bank transfer
Shipping: 10-20 business days by international mail
Shipping Cost: from $10 (economy) to $95 (express)
Warranty: factory warranty
Technical Support: included in price
Conclusion
Balanset-1A constitutes an perfect solution for organizations aiming to implement an efficient equipment balancing system without substantial capital expenditure. The device democratizes access to professional balancing, enabling small enterprises and service centers to offer services at the level of large industrial companies.
The mix of accessible price, ease of use, and professional capabilities makes Balanset-1A an indispensable tool for modern technical maintenance. Investment in this device is an investment in equipment reliability, lower operating costs, and increased competitiveness of your company.
|
|